Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TROUBLE
DISPLAY
IMPORTANT:
The temperature control probe is extremely delicate. Do not remove the probe from its position. In
case of any kind of problem, please contact your local Ingersoll Rand distributor
Pic.3
No loss condensate drain
4.3 DECOMMISSIONING
Cod. 710.0138.40.01 Rev01 – 01.2013
POSSIBLE CAUSE
Ice formation in the evaporator.
Clog.
Air flows continuously through the
condensate drainage.
In case of necessity, decommission the machine and the relevant packaging in compliance
with the rules locally in force.
Pay particular attention to the refrigerant, as it contains part of the refrigerating compressor
lubricating oil. Always contact a waste disposal and recycling facility.
Check the probe; if the trouble persists, replace it.
Check the electronic control board; if the trouble persists,
replace it.
Contact our Service Centre to check the gas charge.
Check if the compressed air inlet/outlet is connected properly.
Check if the connecting tubing is clogged; in case proceed
accordingly.
Check if any valves are closed.
Check the condition of any filter.
Check the no loss condensate drain; if the trouble persists,
replace it.
REMEDY
15 - 170
Werbung
Inhaltsverzeichnis
Fehlerbehebung
