Area; Volumes - Parkside PLEM 50 C3 Bedienungs- Und Sicherheitshinweise

one after the other: Area, Volume, Simple Pythagoras, Double
Pythagoras.
Note: The desired function must be selected before the measurement.

Area

1. Press the Function selection button
measuring mode indication symbol
2. Now measure the length and width of the area to be measured
by pressing the MEAS button
the area icon flashes on the display for the individual measure-
ment values. Right after the second measurement, the calculated
area is shown on the bottom row
corresponding line of the area icon stop flashing. Length, width
and perimeter will be shown on the top three rows of the dis-
play orderly.

Volumes

1. Press the Function selection button
icon of measuring mode indication symbol
display.
2. Now measure the length, width and height of the volume to be
measured by pressing the MEAS button
ing line of the volume icon flashes on the display for the indi-
vidual measurement values. Right after the third measurement,
the calculated volume will be shown on the bottom row
the display and the corresponding line of the volume icon stops
once. The area icon of
15
appears on the display.
25
. The corresponding line of
16
of the display and the
23
twice. The volume
15
appears on the
25
. The correspond-
16
of
23
GB 21