Mounting The Vta-Lifter On A Other Manufacturer's Turntable - Clearaudio Magnify Bedienungsanleitung

User manual / Bedienungsanleitung
2.4 Mounting the VTA-Lifter on a other manufacturers' turntables
In order to mount the VTA-Lifter on the turntable chassis, please first drill the holes into the turntable
chassis.
To ensure the correct position of the holes, please use the measurements given in the drawing
template below (Pic. 8).
Please note that this image is not true to scale.
Pic. 8: Drilling template for mounting the VTA-Lifter on a other manufacturers' turntable
Made in Germany Page / Seite 9