Tips And Tricks; Statement Of Conformity - Parkside PEH 950 Bedienungs- Und Sicherheitshinweise

www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

TIPS AND TRICKS

1. Do not use too much forward pressure. - Too much pressure can considerably reduce performance
and increase the wear on the blades.
2. Always use sharp blades and replace blunt blades promptly. - You will get better cutting performance
and extended tool life.
3. To obtain smooth planed surfaces we recommend that you use shallow planing depths and plane the
surface a number of times.
Further practical tips for power tools can be found in the accompanying booklet on safety advice.
We reserve the right to make technical modifications in the course of further development.
DISPOSAL
The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a
local recycling centre.
Please contact your local council office to find out about disposal facilities for your worn-out electrical
tools.

STATEMENT OF CONFORMITY

We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare
that this product conforms with the following EC regulations:
Machinery Directive:
EU Low Voltage Directive:
Electromagnetic compatibility:
Applicable harmonised standards:
Description / Model type:
Bochum, 31.10.2003
Hans Kompernaß
- Managing Director -
(98/37 EC)
(73/23 EEC), (93/68 EEC)
(89/336 EEC)
EN 50144-1: 1998+A1:2002
EN 50144-2.14: 2001
PARKSIDE PEH 950 power planer
t k
14 14 14