Stihl HSA 65 Gebrauchsanleitung Seite 34

English
– Do not operate in a hazardous
location, i.e. in a location where
there are combustible liquids
(fumes), vapors or dusts. Chargers
can produce sparks, which may
ignite the dust or vapors – risk of
explosion.
– In the event of smoke or fire in the
charger, disconnect it from the wall
outlet immediately.
Check the charger's con-
necting cord regularly for
damage. If the connect-
ing cord is damaged,
immediately disconnect
the plug from the wall
outlet to avoid the risk of
electric shock.
– Never jerk the connecting cord to
disconnect it from the wall outlet. To
unplug, grasp the plug, not the cord.
Have a damaged connecting cord
repaired by an experienced
electrician.
– Do not use the connecting cord for
any other purpose, e.g. for carrying
or hanging up the charger.
– Check the connecting cord and plug
for damage. Never use damaged
cords and plugs or connecting cords
that do not comply with regulations.
– To reduce the risk of stumbling,
position and mark the connecting
cord so that it cannot be damaged
or endanger others.
To reduce the risk of electric shock:
32
– Always connect the unit to a
properly installed wall outlet.
– Make sure the insulation of the
connecting cord and plug is in good
condition.
After using the charger,
unplug it from the wall
socket.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
but allow complete free-
dom of movement. Wear
snug-fitting clothing, an
overall and jacket combi-
nation, do not wear a
work coat.
Avoid clothing that could get caught on
branches or brush or moving parts of the
machine. Do not wear a scarf, necktie or
jewelry. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
Wear sturdy shoes with
non-slip soles.
Wear safety glasses.
Wear heavy-duty gloves.
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
Transporting the Unit
Always switch off the power tool, remove
the battery and fit the blade scabbard –
even when you carry the unit for short
distances.
Remove the battery from
the power tool. This
avoids the risk of the
motor starting
unintentionally.
Carry the power tool by the handle –
cutting blades behind you.
Transporting in a vehicle: Properly
secure the power tool to prevent
turnover and damage.
HSA 65, HSA 85