Safety Instructions - Ferm TSM1008 Gebrauchsanweisung

GB
Product information
Fig. 1
1. Table surface
2. Protective hood
3. Push stick
4. Saw blade
5. Riving knife
6. Insert piece
7. On/off switch
8. Motor
9. Mains cable
10. Frame
11. Rip fence
12. Interlocking knob
13. Mitre guide
14. Nut
15. Screw
16. Spindle

2. SAFETY INSTRUCTIONS

The following symbols are used in these instructions for use:
Read instructions carefully
In accordance with essential applicable safety standards of European
directives
Denotes risk of personal injury, loss of life or damage to the tool in case of
non-observance of the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains electricity in the case that the cord
gets damaged and during maintenance
Keep bystanders away
Wear ear and eye protection
06 Ferm Ferm
GB
83