Product Description And Specifications; Intended Use; Product Features - Bosch GCM 12 SDE Professional Originalbetriebsanleitung

OBJ_BUCH-2301-002.book Page 30 Monday, December 22, 2014 10:15 AM
30 | English
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbols and their meaning
 Laser Radiation
Do not stare into beam
Class 2 laser product
 Keep hands away from the cutting
area while the machine is running.
Danger of injury when coming in con-
tact with the saw blade.
 Wear a dust respirator.
 Wear safety goggles.
 Wear ear protectors. Exposure to
noise can cause hearing loss.
 Danger area! Keep hands, fingers or
arms away from this area.
1 609 92A 0Z5 | (22.12.14)
Symbols and their meaning
Product Description and Specifica-
tions

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –52° to +60° as well as vertical bevel
angles from 47° (leftward) to 47° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
The table shows the rec-

Product Features

ommended speed setting
The numbering of the components shown refers to the repre-
depending on the materi-
sentation of the power tool on the graphic pages.
al to be worked: alumini-
um, plastic, wood.
1 Fence
(not available for all coun-
2 Adjustable fence
try-specific product ver-
3 Stop for standard bevel angles 47°, 45°, 33.9° and
sions)
4 Scale for bevel angle
5 Right bevel angle indicator
6 Locking screw for slide device
When sawing vertical bev-
7 Clamping lever for any bevel angle
el angles, the adjustable
fences must be pulled
8 Speed regulator
outwards or removed
completely.
9 Transport safety-lock
10 Transport handle
11 Blade guard
12 Handle
13 Locking lever
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
Shows the rotation direction of the SDS
bolt for tightening the saw blade
(counterclockwise) and for loosening the
saw blade (clockwise).
Clamping lever shut:
The set bevel angle of the tool arm is
locked.
Clamping lever open:
Adjusting bevel angles is possible.
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
22.5°
(not available for all country-specific product versions)
Bosch Power Tools