Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Menu
5.19
Password
After selecting "ON" enter a six-digit PIN to protect your camera against unau-
thorized access. With the up and down arrow button you change the setting,
with the left and right button you move one position forward or backward.
Confirm the settings with "OK". Choose a code that you can remember well,
and/or write this code down, e.g. on the camera box.
Note: Please use the password option very carefully. If you forget the
selected PIN, the camera is also useless for you. In this case please contact
our customer service.
5.20
SD Cycle
By activating this menu setting (switch to "ON") you allow new recordings to
be shot even if the memory card is full. Please be aware that in the "Cycle
Recording" mode the oldest recordings will be overwritten by new recordings.
This option is especially useful if you use the SECACAM for property protec-
tion, as it helps to prevent the camera from stopping to further record when
the memory card is full.
5.21
Reset
Choose "Yes" to reset the camera settings to the default values and confirm
the selection by pressing the "OK" button. The date and time setting is not
affected. Of course your files aren't erased as well.
5.22
Mobil Test Picture
(This option is only usable with the mobile function switched on)
This function allows you to send test photos through your mobile carrier to
your Control Center. This allows you to check if your SECACAM is connected
to a mobile network and also if the mobile push notification setting is
funtioning.
When using your mobile setting, we recommend utilizing the "Delay",
"Time lapse" and "Timer" menu options. They will assist you in finding
the optimal number of photos you wish to receive.
57
Werbung
Inhaltsverzeichnis
