3. Set Up
Closing: Close the camera body and place the clamp on the hooks. To lock
it, press the clamp backwards.
ATTENTION: Make sure, that the locking clamp closes correctly with both
hooks. If the clamp should seem crooked after closing, it didn't hook in
correctly and might be damaged by rain.
3.2 Inserting the Batteries
IMPORTANT: The camera must be turned off before inserting new bat-
teries! Please use either disposable or rechargeable batteries. To avoid
damage to the camera do not mix different types of batteries. In the case
of black nightvision images, switch all batteries with freshly charged ones.
Battery compartment: Open the camera. Please ensure that you correctly
place the batteries with the matching polarity. This is marked for you in the
battery compartment.
45