Mounting The Antennae - SecaCam Explorer 5000 Bedienungsanleitung

3. Set Up
Write protection: A small slider is located on the
side of each memory card to enable or disable the
write protection. Before inserting the memory card
make sure that the slider is in the unlock position
and the write protection on the memory card is
not activated. Only in this position the camera can
write data onto the memory card.
Formatting the memory card: Before its first use,
we recommend formatting the memory card on
your PC. TTo format the memory card in your ca-
mera alternatively, activate the camera display by
switching the ON/SETUP/OFF switch to SETUP.
Then press the PLAY button to enter the preview
mode. After pressing the MENU button, you will be
given the options to "Format" or "Delete" photos.
Choose "Format" and press the OK button.
Note: When formatting the memory card all pre-
viously stored images and videos will be erased
3.4 Monting the Antenna
To access the mobile functions, the antenna must be installed.
Remove the yellow protective
cap from the antenna-socket and
screw in the antenna to the cam-
era body until it is tight.
The antenna can be repositioned
to different angles and positions.
The reception and transmission
of data is not affected by the po-
sitioning.
47