Mobile; Mobil Transfer; Mobil Max Photos/Std - SecaCam Explorer 5000 Bedienungsanleitung

5. Menu
preference. You can choose to delay the triggering of new photos anywhere
between 3-60 seconds. Once you have chosen your preferred delay period,
press the "OK" button.
5.11

Mobile

Here you can toggle the mobile features of the SECACAM Explorer mobile on
and off. If this option is set "OFF" you will not get any pictures send by your
SECACAM
5.12

Mobil Transfer

(This option is only usable with the mobile function switched on)
Usually your SECACAM sends pictures with the size of 1.920 x 1.440 pixles.
However if you should use your camera in a place with only a 2G Network
coverage, it might take a long time to be send to you. For that you can pick
the option "M" or even "S", which allows your camera to send the picture
faster.
• S (Small) = 1,024 x 768 Pixel
• M (Medium) = 1,280 x 960 Pixel
• L (Large) = 1,920 x 1,440 Pixel
This setting only applies to the pictures send by your SECACAM, not
the one saved on the internal memory card.
5.13 Mobil Pics/Hour
(This option is only usable with the mobile function switched on)
Select the maximum number of photos you wish to have sent to to the app
per hour.
This function is not necessary if your SECACAM is placed in a closed off
room or area. However, if outdoors, this can prevent you from receiving 10
identical photos per hour of the same tree branch.
Note: If, for example, you choose to limit the photos you receive on
your mobile to 10/hr. then any event that happens after the 10th
photo will be saved to your SD card but will not be sent. An hour
after the 10th photo has been sent, the camera will resume sending
you photos.
55