Monting The Antennae; Einsetzen Der Sim-Karte; Getting Started - SecaCam HomeVista Bedienungsanleitung

3.4 Monting the antennae

To access the mobile functions, the
antennae must be installed.
Remove the yellow protective cap from
the antennae-socket and screw in the an-
tennae to the camera body until it is tight.
The antennae can be repositioned to dif-
ferent angles and positions. The reception
and transmission of data is not affected
by the positioning.

3.5 Einsetzen der SIM-Karte

The HomeVista Mobile uses a SIM. The mobile functions of the camera func-
tion exclusively with the already provided SIM. SIMs from other providers are
not compatible with your SECACAM HomeVista Mobile.
The mobile functions of the camera function exclusively with
the already provided SIM. SIMs from other providers are not
compatible with your SECACAM HomeVista Mobile.
Please do not take the SIM out of the camera or switch it with
another SIM. Not even from one of your other SECACAMs.
The SIM-card port is located right above the LCD display. Insert the SIM-
card with the metal contacts facing down and the slanted corner facing to
the left into the port until it is locked in place.

4. Getting started

I.
50
II.
3. Set up
IV.
III.