Auto Mode - Qlima Eleonora 74-2 S-line Gebrauchsanweisung

5.
6.
7.
4
148
man_Eleonora 74-2 S-line ('22) V1.indd 148 man_Eleonora 74-2 S-line ('22) V1.indd 148
ECONO SEND
TURBO
AUTO
ON 1 OFF 1
AUTO: Use this button to repeat the set timer programmes (1 and 2) dai-
ECONO SEND
ON 2 CANCEL OFF 2
ly. Hold the button down for at least 2 seconds to activate/deactivate this
TURBO
mode. The display shows AUTO.
AUTO
ON 1
OFF 1
ON 2 CANCEL OFF 2
CANCEL: Use this button to cancel the programmed switch-on or switch-off
times.
SETTING THE TEMPERATURE
ECONO SEND
Use the and buttons (1&2) to set the desired temperature (from 7ºC to
TURBO
ECONO SEND
40ºC). When the desired temperature has been selected, press ON 1 AUTO
OFF 1
TURBO
ON 2 CANCEL OFF 2
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
SETTING THE HEAT OUTPUT
Use the button (1) to select the desired heat output setting. Then push
ECONO SEND
(3). The text on1-on2-on3-on4 or on5 will appear on the stove. The power (2) will
TURBO
also be shown on the remote control. You can also select Auto mode. See figure 6.
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2

AUTO MODE

In this mode, the stove uses the difference between the desired temperature and
the room temperature itself to calculate the required output. To select auto mode,
press (1) until the
ECONO SEND
end auto mode, press
TURBO
ECONO
(2). See figure 7.
ECONO SEND
AUTO
ON 1 OFF 1
TURBO
TURBO
ON 2 CANCEL OFF 2
ON 1
ON 1 AUTO
OFF 1
TURBO MODE
ON 2
ON 2 CANCEL OFF 2
In Turbo mode, the stove operates at maximum power for 30 minutes. In Turbo
mode the temperature is pre-set to 30ºC. After 30 minutes, the stove returns to the
mode before the Turbo mode was activated. To select Turbo mode, hold down the
ECONO SEND
button (1) for more than 2 seconds, and then push
TURBO
ON 1 AUTO
OFF 1
mode, hold down the
ON 2 CANCEL OFF 2
disappear from the remote control display and be replaced by the output level and
the set temperature. Press
ECONO MODE
In Econo mode, the temperature remains constant. Every 10 minutes the stove
adjusts the power until heat output level 1 is reached. To select Econo mode, hold
down the button (1) for more than 2 seconds, until Econo appears in the dis-
ECONO SEND
play (2) and then push TURBO
ECONO
ON 1 AUTO
OFF 1
TURBO
(1) for at least 2 seconds. The word Econo will disappear from the remote control
ON 2 CANCEL OFF 2
ON 1
display (2). Press (3) to confirm your choice. See figure 9.
ECONO SEND
ON 2
TURBO
ON 1 AUTO OFF 1
PROGRAMME 1 (ON1 AND OFF1)
ON 2 CANCEL OFF 2
1. The desired switch-on and switch-off timer must be set when the
remote control is switched off.
2. The stove retains the temperature and heat output settings it had
before being switched off.
3. The minimum period of time between switching off and switching on
is 20 minutes. This is the time needed for the stove to complete the
cooling-down phase.
4. After a brief power interruption, the timer mode will have to be set
again.
symbol appears. Press
ECONO SEND
TURBO
(1) again, select the desired output and confirm with
AUTO
ON 1
SEND
ON 2 CANCEL
AUTO
OFF 1
CANCEL OFF 2
ECONO SEND
button (1) for at least 2 seconds. The word Turbo (2) will
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
(3) to confirm your choice. See figure 8.
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
(3). To deactivate this mode, hold down the
SEND
AUTO
OFF 1
CANCEL OFF 2
(3). See figure 5.
ECONO SEND
TURBO
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
TURBO
ON 1 AUTO
ON 2 CANCEL
(2) to confirm your choice. To
OFF 1
OFF 2
(3). To deactivate this
ECONO SEND
TURBO
ON 1 AUTO OFF 1
ON 2 CANCEL
OFF 2
button
ECONO SEND
TURBO
ON 1 AUTO
ON 2 CANCEL
OFF 1
OFF 2
OFF 1
OFF 2
03-05-2022 16:27 03-05-2022 16:27