Special Hazards - Balluff BNI CIP-351-000-K015 Betriebsanleitung

BNI CIP-351-000-K015
Safe I/O Module, EtherNet/IP™ CIP Safety™
IP67 Module
2.10.

Special hazards

In the following section the residual risks are identified, which result from the hazard analysis.
Regard the listed safety warnings here and the notes in the whole manual to reduce health hazards and
to avoid dangerous situations.
Electric current
Danger!
Risk of death by electric current!
Contact with live parts is immediate danger to life. Damage of the insulation or of
components can be danger to life.
Therefore:
Immediately turn off the power supply when the insulation is damaged. Work on the
electrical system only by qualified personnel.
Always power-off and secure the electrical system during work.
Risk by residual energy
Danger!
Risk of death by electric current!
After disconnecting the device from main voltage, parts such as power connections
should only be touched when the capacitors are discharged in the device.
Therefore:
Regard discharge time of the capacitors; do not touch live parts before having observed
a period of 1 minute.
If there are additional connected capacitors on the link, the discharge of the link can last
considerably longer. In this case you have to determine the required waiting period or
even to measure whether the device is safe.
Moving objects
Warning!
Risk of injury from moving parts!
Rotary and linear moving parts can cause serious injuries.
Therefore:
Do not touch moving parts during operation. Do not open the cover during operation.
The mechanical residual energy depends on the application.
Driven components rotate respectively move for a certain time even after switching off
the power supply.
Fire fighting
Danger!
Risk of death by electric current!
Risk of an electrical shock when using a conducting firefighting medium.
www.balluff.com 13