Balluff BNI CIP-351-000-K015 Betriebsanleitung Seite 232

BNI CIP-351-000-K015
Safe I/O Module, EtherNet/IP™ CIP Safety™
IP67 Module
LED assignment
Module Logic and Input Power Status LED (UB)
LED State
OFF
GREEN
YELLOW
Module Output Auxiliary Power Status LED (UL)
LED State
OFF
GREEN
YELLOW
Safe Input Status LEDs (Ix)
LED State Safety
Input
Status
OFF Good
YELLOW Good
RED
Fault
BLINKING
Fault
RED
www.balluff.com
Description
Module power supply not connected
Module power supply is connected and in is the valid range
(24 VDC  -20% to +25%)
Module power supply is detected but is outside the valid range
(24 VDC  -20% to +25%)
Description
Module power supply not connected
Module power supply is connected and in is the valid range
(24 VDC  -20% to +25%)
Module power supply is detected but is outside the valid range
(24 VDC  -20% to +25%)
Description
Input is OFF or module being configured.
Input is ON
A fault in the input circuit has been detected, or a discrepancy error between the
two Inputs of a dual input pair has been detected.
A fault in the Input circuit of the Input partner of a dual Input pair has been detected
or unrecoverable detected faults affecting all inputs of the module.
56