Balluff BNI CIP-351-000-K015 Betriebsanleitung Seite 234

BNI CIP-351-000-K015
Safe I/O Module, EtherNet/IP™ CIP Safety™
IP67 Module
Network Status LED (NET)
LED State Status
No Power /
OFF
No IP Address
Online /
FLASHING
Not Connected
GREEN
Link OK / Online
GREEN
/ Connected
Connection
FLASHING
Time-out
RED
Critical link
RED
failure
Communication
FLASHING
faulted
RED GREEN
/
Module Configuration Lock Status LED (LOCK)
LED State Mode
either no
configuration or
either
OFF
configured by a
CIP Safety
Originator
Configuration
YELLOW
Locked
Configuration
FLASHING
not Locked
YELLOW
Module faults
RED
www.balluff.com
Description
The module is not online.
The module may not be powered, look at Module Status LED (MOD).
The module is Online but has no connection in the established state
(IDLE mode).
The module is Online and has connections in the established state
(EXECUTING mode).
One or more I/O connections are in the timed–out state.
Failed communication device. The module has detected an error that
has rendered it incapable of communicating on the network.
A specific communication faulted (device uses this indication to allow
maintenance personnel commissioning the TUNID in a safety device).
Description
The module is not configured or has been configured by a safety
originator (FW Open Type 1).
Valid configuration received and locked.
Valid configuration received and not locked.
Bad safety configuration
58