Balluff BNI CIP-351-000-K015 Betriebsanleitung Seite 280

BNI CIP-351-000-K015
Safe I/O Module, EtherNet/IP™ CIP Safety™
IP67 Module
Select the Module Configuration tab to define the parameters for the Safety Inputs and Safety Outputs.
Safety Inputs Configuration
Point Operation Type
Type
Single
Equivalent
Complementary
Point Mode
Mode
Not used
Safety
Safety Pulse
Test
Standard
www.balluff.com
Comments
Safety Inputs are treated separately.
Safety Inputs are treated as an
evaluation is done after discrepancy time.
Safety Inputs are treated as a
evaluation is done after discrepancy time.
Comments
Input is disabled.
Input is enabled and no external pulse test is needed. This is
commonly used when the Input device generates its own pulse test
such as light curtain.
Input is enabled and a Pulse Test must be used as the 24 V. The pulse
test is configured via the Test Source option.
Input is enabled but doesn't participate in any safety function. This is
commonly used to connect non-safe input device.
Equivalent dual-channel. The
Complementary dual-channel. The
104