Balluff BNI CIP-351-000-K015 Betriebsanleitung Seite 331

BNI CIP-351-000-K015
Safe I/O Module, EtherNet/IP™ CIP Safety™
IP67 Module
Version: This section gives all the versions of the different firmware and hardware components.
•
LED Status: Reflect the current state of the LEDs.
•
Rotary State: Reflect the current positions of the 3 rotaries.
•
Log: This area contains the log messages stored in the module memory. The first message is the
•
most recent one. The messages are time stamped; time is based on the power-up of the module
meaning that time return to 0 at each restart of the module.
2 special messages are generated at the restart of the module. These messages are only
informative:
- Initialized CCom (0x07) – Param 1 indicates the number (in hexadecimal) of start of the
module since its manufacturing.
- FPGA communication is running, CIP can be initialized
Note!
This page is not refreshing cyclically; Click the Refresh button to update the contents.
www.balluff.com 155