About These Instructions; Safety; Identification Of Safety Instructions - Wilo Para MAXO Einbau- Und Betriebsanleitung

en

About these instructions

1 About these instructions
These instructions are an integral part of the product. Adherence to these instruc-
tions is a requirement for the intended use and correct operation of the product:
ƒ
ƒ
ƒ
ƒ
The language of the original operating instructions is German. All other languages of
these instructions are translations of the original operating instructions.
2

Safety

This chapter contains basic instructions for the individual life cycles of the product.
Failure to observe this information carries the following risks:
ƒ
ƒ
ƒ
ƒ
ƒ
Failure to observe the instructions will result in the loss of any claims for damages.
The directions and safety instructions in the other sections must also be observed!
2.1

Identification of safety instructions

These installation and operating instructions set out safety instructions for prevent-
ing personal injury and damage to property, which are displayed in different ways:
ƒ
ƒ
56
Read these instructions before commencing any work and keep them in an ac-
cessible place at all times.
Observe instructions and labelling on the pump.
Observe local regulations where the pump is installed.
No liability will be accepted for damage resulting from failure to follow these in-
structions.
Danger to persons from electrical, mechanical and bacteriological effects as well
as electromagnetic fields
Environmental damage from discharge of hazardous substances
Damage to property
Failure of important product functions
Failure of required maintenance and repair procedures
Safety instructions relating to personal injury start with a signal word and are
preceded by a corresponding symbol.
Safety instructions relating to property damage start with a signal word and are
displayed without a symbol.
WILO SE 2022-04