Replacing Hot Counter infrared light bulb
The "bain marie" and "hot plate" versions of the Hot Counters can be equipped with a heat lamp.
Before starting any operation entailing light bulb replacement, make sure power is disconnected and/
or open the power isolator. Also remember that any technical assistance and extraordinary mainte-
nance must only be carried out by qualified technical personnel.
IMPORTANT: replace the light bulb with a part of the same type and power.
To replace the light bulb:
1. Disconnect power to the counter and wait for hot parts to cool off before proceeding any further;
2. Carefully lift the glass from the bottom upwards;
3. Remove the grating from the lamp holder, unscrewing the four fixing screws Fig. 2a-2b;
4. Release the light bulb to be replaced from the lamp holder Fig. 2c;
5. Secure the new light bulb in its seat;
6. Put the grating back on the lamp holder, securing it with the four screws;
7. Power the counter, closing the power isolator.
Fig. 2a
Fig. 2c
20
Fig. 2b
Infrared lighting lamps