Important Informations - Nordcap MILOS 2.0-Serie Bedienungsanweisung

IMPORTANT INFORMATIONS

Installation recommendations
The installation of the appliance and the refrigerant unit must only be made by the manufac-
−
turer's service personnel or similarly skilled person;
Installation and the electrical connection must be performed in compliance with national and
−
local standards in force.
Isolate the power circuit upstream by means of an omnipolar circuit breaker switch with a mini-
−
mum contact opening of 3 mm.
General recommendations
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
−
similarly qualified persons in order to avoid hazard.
Do not store explosive substances, such as pressurised containers with flammable propellent,
−
inside this equipment. Keep free from obstructions the ventilation openings located in the
equipment shell or in the flush-mounting frame.
Loading products for display
The arrangement and amount of products must not exceed the load limit.
We also recommend making sure that the full load is not excessive for the structure of the counter.
The following are the approximate capacity values of the shelves.
Respect these indications as much as possible.
Max capacity of bottom surface
120 Kg x Surface 625
Precautions for use and minor maintenance
Before starting any cleaning, maintenance or parts replacement, even if not electrical, make sure
that electric power is disconnected and/or open the omnipolar power isolator.
Any technical assistance and extraordinary maintenance must only be carried out by quali-
fied technical personnel.
Max capacity cover glass + middle shelf
6 Kg x Mod. 1250
6