Nordcap MILOS 2.0-Serie Bedienungsanweisung Seite 32

Replacing light bulbs
Replacing upper light bulb
Before starting any operation entailing light bulb replacement, make sure power is disconnected
and/or open the power isolator.
Also remember that any technical assistance and extraordinary maintenance must only be carried
out by qualified technical personnel.
IMPORTANT: replace the light bulb with a part of the same type and power.
To replace the light bulb:
1. Disconnect power to the counter;
2. Carefully lift the glass from the bottom upwards;
3. Release the light bulb, both on the right and left, slightly pressing downwards Fig. 1a;
4. Disconnect the lamp connection pins Fig. 1b;
5. Connect and restore the new lamp in its seat;
6. Power the counter, closing the power isolator.
Upper light bulbs
Fig. 1a
7
Fig. 1b