General Recommendations - Nordcap MILOS 2.0-Serie Bedienungsanweisung

General recommendations

To be read before using the counter.
This manual forms an integral part of the product and must be stored with the equipment to fa-
−
cilitate rapid consultation.
The adjuster must not be used with other functions other than those described below, specifi-
−
cally it cannot be used as a safety device.
Before proceeding check the application limits.
−
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or simi-
−
larly qualified persons in order to avoid hazard.
Any technical assistance and extraordinary maintenance must only be carried out by
−
qualified technical personnel.
Safety precautions.
Before connecting the counter ensure that the supply voltage is as required.
−
Connect the unit on the ground.
−
Do not expose the unit to water or humidity: use the counter only within the limits of operation
−
provided for.
Attention: before carrying out any kind of maintenance remove electric connections from the
−
counter.
The electric panel must never be opened.
−
If malfunction or failure occurs, contact qualified staff for analysis and repair.
−
Connect the power cable to a socket that is easily accessible even after the counter has been
−
positioned.
Isolate the power circuit upstream by means of an omnipolar circuit breaker switch with a mini-
−
mum contact opening of 3 mm.
Do not store explosive substances, such as pressurised containers with flammable propellent,
−
inside this equipment.
Keep free from obstructions the ventilation openings located in the equipment shell or in the
−
flush-mounting frame.
Do not use mechanical devices orother means in order to speed up the defrosting process other
−
than those recommended by the Manufacturer.
Do not damage the coolant circuit.
−
Do not use any electrical devices inside the compartments used to store frozen food other than
−
the type recommended by the Manufacturer.
The counter cannot be used by children or by disabled people without proper supervision.
−
It is forbidden to remove any guards or panels that require the use of tool for their removal.
−
It is absolutely forbidden to tamper with or alter the product in any way.
−
The counter is suited for maintaining the temperature of the products and not for reducing it,
−
therefore only introduce products already cooled down at their respective preservation tempera-
ture.
11