Bartscher 600 Serie Kurzanleitung Seite 18

Electric oven MODELS SERIES K6 – C2
In order to switch on the electric oven, choose the desired cooking temperature
thanks to the thermostat (1); the two lamps light on. The green light stays on all the
time to show that there is tension, while the orange one lights off as soon as the
oven reaches the right temperature.
In order to switch off the electric oven, turn one of the two control knobs into the 0
position.
Maxi oven MODELS SERIES C2 – K4 SOLUTION
In order to light the oven burner, proceed in the following way:
- Open the oven door and turn the knob (1) from the off
●
position into the position
- Press down the button;
- Push the button of the piezoelectric lighter (2)
to light the pilot burner;
- Keep the knob pressed down until the thermocouple heats
up, keeping the pilot lit; this can be checked through the slit
in the control panel;
- Light the main burner, positioning the knob in one of the possible positions. Choose the position most
suited to the desired type of cooking, considering that every position corresponds indicatively to the
temperatures shown below:
Position (N°)
Temperature (°C)
In order to put out the main burner, the knob has to be turned to the right into the on position
out also the pilot, turn the knob again into the off position
Ventilated electric oven MODELS SERIES C2 – K7
Before turning on the electric oven, it is necessary to select the
desidered type of cooking in the following way:
- Turn the knob (1) into the desired position;
;
1 2
60 100
18
3 4
140 180
●
.
18/44 en
5 6
220 260
7
300
; as for putting