JUNO JB121D0 Benutzerinformation Seite 55

Step 3
Close the oven door halfway to the first
opening position. Then lift and pull to re‐
move the door from its seat.
Step 4
Put the door on a soft cloth on a stable
surface.
Step 5
Hold the door trim (B) on the top edge of
the door at the two sides and push in‐
wards to release the clip seal.
Step 6
Pull the door trim to the front to remove it.
Step 7
Hold the door glass panels by their top
edge and carefully pull them out one by
one. Start from the top panel. Make sure
the glass slides out of the supports com‐
pletely.
Step 8
Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the
Step 9
If the door is installed correctly, you will hear a click when closing the latches.
glass panels in the dishwasher.
After cleaning, install the glass panels and the oven door.
2
B
1
ENGLISH 55