Parkside PLBA 20-Li A1 Originalbetriebsanleitung Seite 8

GB CY
• Pay attention to people, espe-
cially children, pets, open win-
dows, etc. The blown material
can be thrown in their direction.
Stop working if they are in close
proximity. Keep a safety dis-
tance of 5 m around you.
• Be familiar with your surround-
ings and pay attention to poten-
tial dangers that may be over-
looked when working.
• Carefully inspect the surface
to be cleaned and remove all
wires, stones, cans and other for-
eign bodies.
• Use a rake or broom to remove
dry leaves before beginning the
blowing process.
• Operate the device only with a
mounted blower pipe.
• In very dry conditions, lightly
moisten the surface or use a
sprayer to reduce the build-up of
dust.
• Do not work with a damaged or
incomplete device or one which
has been converted without the
permission of the manufacturer.
Before use, check the safety
status of the device, in particular
the mains cable and the switch.
• Only use the device when fully
assembled.
• Never operate the device with
defective protection equipment
or faulty protection covers or
without any protection equip-
ment.
• Please be aware that the op-
erator or user is responsible for
accidents or injuries to other
people or their property.
8
• Avoid wearing loose clothing,
clothing with hanging laces or
ties.
• Operate the machine in a rec-
ommended position and only
when standing on a solid, flat
surface.
• Do not operate the machine on
a paved surface or a gravel sur-
face where the ejected material
could cause injury.
• Always perform a visual inspec-
tion prior to use to make sure
that the housing is undamaged.
Replace worn or damaged com-
ponents in sets to ensure balance.
Replace damaged or illegible
markings.
Operation:
• Do not switch on the device if it
is held upside down or is not in
operating position.
Avoid starting the device unin-
tentionally. Make sure that the
device is switched off before you
pick it up or carry it.
Having your finger on the switch
of the device while carrying it
can cause accidents.
• Never point the device at others,
and in particular, do not point
the air jet at the eyes and ears
during operation.
• Always ensure secure position-
ing, particularly on slopes, when
working. Always hold the device
tightly with both hands and only
work with a correctly adjusted
carrying strap.
• Do not stretch too far and do not