Safety Instructions; Symbols And Icons - Parkside PLBA 20-Li A1 Originalbetriebsanleitung

GB CY
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

This section describes the basic
safety rules when working with the
device.

Symbols and icons

Symbols used in the
instructions
Warning!
Read the manual.
Danger due to materials
blown out of machine!
Remove persons in the
vicinity from the danger area.
Caution.
Rotating impeller wheel.
Keep hands away.
6
Remove the battery before
maintenance work.
Wear eye protection.
Wear ear protection.
Wear breathing protection.
Wear anti-slip safety shoes.
Do not leave the device in
wet conditions. Do not work
in the rain
Do not wear long hair
uncovered. Use a hair net.
Guaranteed sound power
level
83
Electrical appliances must
not be disposed of with the
domestic waste.
The device is part of the
Parkside X 20 V TEAM
series.
Symbols on on-off switch:
not in operation
O
I in operation
Keep a safety dis-
tance of at least 5 m
from bystanders.