Multidis SF
General information
1.
General information
The original operating instructions are written
in German.
The operating instructions in other languages
have been translated from German.
1.1
Validity of the instructions
These instructions are valid for the Multidis SF
heating circuit distributor/collector in the
versions for 2 to 12 heating/cooling circuits.
1.2
'Scope of delivery
Check your delivery for transport damage and
completeness.
The scope of delivery includes:
•
Flow distributor
•
Return collector
•
2 ball valves (only enclosed with item no.
1405952 - 1405962)
•
2 brackets
•
4 screws
•
4 dowels
•
2 sealing rings for the connection
between heating circuit distributor/
collector and ball valve
•
Stickers for circuit identification
•
Operating instructions
1.3
Contact
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com
Technical service
Phone: +49 (0) 29 62 82-234
140645281-V01.02.2022
1.4
Declaration of conformity
Oventrop GmbH & Co. KG hereby declares
that this product has been manufactured in
compliance with the essential requirements
and the relevant provisions of the relevant EU
directives.
The declaration of conformity can be
requested from the manufacturer.
1.5
Symbols used
Highlights important information and
further additions.
f
Action required
•
List
1.
Fixed order. Steps 1 to X.
2.
Result of action
Z
2. Safety-related information
2.1
Correct use
Operational safety is only guaranteed if the
product is used as intended.
The Multidis SF heating circuit distributor/
collector serves the central distribution of the
heating or cooling water to the different
circuits of a dwelling.
Any use beyond and/or different from this is
considered unintended use.
Claims of any kind against the manufacturer
and/or his authorised representatives for
damage resulting from unintended use cannot
be recognised.
Intended use also includes correct compliance
with these instructions.
17