Scope Of Delivery; Intended Use - Dometic BUTTNER MT StandbyChargerPRO Montage- Und Bedienungsanleitung

MT StandbyChargerPRO
3

Scope of delivery

Quantity Description
1 Standby Charger
1 Installation and Operating manual
4

Intended use

The standby charger is used to recharge and maintain the charge of the starting battery in vehicles
with an additional house battery. The standby charger may only be connected to 12 V
The standby charger is intended to be used to charge the following battery types:
• Lead acid batteries
• Lead gel batteries
• Absorbed glass mat (AGM) batteries
• Lithium batteries
The standby charger is not intended to be used to charge other types of batteries (eg. NiCd,
NiMH, etc.).
The standby charger is suitable for:
• Installation in recreational vehicles (RV) and motor homes
• Stationary or mobile use
• Indoor use
The standby charger is not suitable for:
• Outdoor use
This product is only suitable for the intended purpose and application in accordance with these
instructions.
This manual provides information that is necessary for proper installation and/or operation of the
product. Poor installation and/or improper operating or maintenance will result in unsatisfactory
performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the man-
ufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
EN
Scope of delivery
g
batteries.
11