King gates MODUS Installierungs-Und Gebrauchsanleitungen Und Hinweise Seite 25

EU DECLARATION OF CONFORMITY AND DECLARATION OF
INCORPORATION OF PARTLY COMPLETED MACHINE
Declaration in accordance with Directives: 2014/35/UE (LVD);
2014/30/UE (EMC); 2006/42/CE (MD) ANNEX II, PART B
The manufacturer V2 S.p.A., headquarters in Corso Principi di
Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
MODUS 280 MA; MODUS 420 MA; MODUS XL MA
MODUS 280 SL; MODUS 420 SL; MODUS XL SL
Description:
Electromechanical gear motor with built-in board (MA versions)
Electromechanical gear motor (SL versions)
• is intended to be installed on gates, to create a machine according to the provisions of the Directive
2006/42/EC. The machinery must not be put into service until the final machinery into which it has to be
incorporated has been declared in conformity with the provisions of the Directive
2006/42/EC and 89/106/CE.
• is compliant with the applicable essential safety requirements of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Directive RoHS3 2015/863/EU
The relevant technical documentation is available at the national authorities' request after justifiable request to:
V2 S.p.A., Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italia
The person empowered to draw up the declaration and to provide
the technical documentation:
Sergio Biancheri
Legal representative of V2 S.p.A.
Racconigi, 01/06/2019