Steinbach Premium 100 Originalbetriebsanleitung Seite 54

4. Assemble the filter containers
5. Position the filter containers over the
filter units.
6. Insert the divider
vessel.
7. Connect the divider to the top filter
container.
Pay attention to the positioning of the
recesses in the divider.
8. Push the filter lock
the O-ring into the top filter container
until you hear it lock into place.
9. Fill the clean water chamber
water to approximately 1/3 full.
10. Fill the filter chamber
sand.
Please refer to the section "Technical
data" for the required quantities.
Make sure that no filter medium gets
into the clean water chamber
because it will be pumped into the
pool when the pump is in operation.
11. Have a second person help you insert
the vessel seal
foreign objects in the groove and make
sure that the seal is fitted correctly.
12. Lubricate the vessel seal
dishwashing detergent or soap (not
included in the package contents) to
make it easier to install the valve head.
Never use oil or grease since this could
damage the filter vessel.
54
.
11
into the filter
7
together with
12
with
33
with filter
32
33
. Check for any
3
with
3
9
11
10
32
11
32
12
12
7
33
3