Loading; Shutdown And Restart; Shutdown; Restart - AHT GD Serie Betriebsanleitung

en | AHT Cooling Systems GmbH
Goods are removed from the front.

10 .1 Loading

CAUTION
Material breakage.
Falling hazard. Impact hazard due to falling
parts/goods. Cuts.
▪ When loading, do not climb onto or into the
appliance.
Falling objects.
Impact injuries.
▪ Do not set down any objects on the appli-
ance.
▪ Observe maximum loads of any type of
storage rack (see →Technical data)
▪ Carefully add goods.
Opening/closing the glass doors.
Hands (body parts) may become trapped on
the hinge or handle side.
▪ When opening/closing, do not reach into
the opening gap, especially on the hinge
side.
▪ Pay attention to other persons when open-
ing/closing.
NOTICE
Property damage due to misuse.
▪ Do not load the device with goods until the temper-
ature prescribed for the product has been reached.
▪ Carefully add goods.
▪ Adhere to loading specifications.
▪ Close glass door immediately and completely after
loading.
Check the temperature on the display screen
Page 31, Chapter 5.
Loading specification
– Do not add goods beyond the end of the display
shelf.
– Do not cover the return air grille with goods.
Fig. 10: Return air grille (1)
405861_1_0819
1

10.2 Shutdown and restart

WARNING
Work on the electrical system.
Contact with live parts may result in electric
shock.
▪ Only qualified staff may carry out work on
the electrical system.
▪ Observe the electrical safety rules prior to
commencing work.
1. Disconnect the appliance.
2. Secure the appliance against reconnec-
tion.

10.2.1 Shutdown

Reasons for shutdown by qualified staff
– Maintenance, service, repair (see →Maintenance,
service, and repairs)
– Main cleaning (see →Main cleaning)
Reasons for shutdown by operating personnel
– Damage to appliance
WARNING
Shutdown of the appliance.
Contact with live parts may result in electric
shock.
▪ Only previously trained staff may cut power
of the device.
▪ Disconnect the appliance and secure it
against reconnection.
Steps for shutdown
– Move the goods to another appliance with the
same product temperature class.
– Disconnect the appliance:
1. Press on the control element (see →
Page 31, Chapter 5).
2. Switch off circuit breakers used with the appliance
and secure them against reconnection (see →Fus-
ing).
3. Switch off the appliance circuit by removing the
mains plug and secure against reconnection (see
→Electrical connection).
Longer shutdown
– Carry out the steps for shutdown.
– Perform basic cleaning (see →Basic cleaning).
NOTICE
Material damage during prolonged shutdown.
▪ Do not expose the appliance to heat radiation.
▪ Do not place anything in or on the appliance.
▪ Store the appliance in a stable operating position
(horizontal alignment).

10.2.2 Restart

See "Start-up" →Start-up.
Loading | 10.1
37 / 478