18
Bosch Rexroth AG
Wartung BS 2/T*, BS 2/TE (Forts.)
Maintenance BS 2/T*, BS 2/TE (cont'd.)
Maintenance BS 2/T*, BS 2/TE (suite)
Zahnriemen (3, Fig. 16)
Regelmäßige Sichtkontrolle,
insbesondere der Schweißstelle auf
Verschleiß .
Laufrichtung (in Pfeilrichtung)
kontrollieren!
Bei Bedarf Zahnriemen nachölen mit:
Mineralöl Viskosität 68 nach DIN (z. B.
Aral, Shell).
*BS 2/T abgebildet!
*BS 2/T illustrated!
*BS 2/T représenté !
Toothed belt (3, Fig. 16)
Conduct visual inspections regularly for
wear, in particular at the welded joint.
Check transport direction (in direction of
arrow)!
Oil the toothed belt again if necessary
with mineral oil viscosity 68 according to
DIN (e.g. Aral, Shell).
TS 2plus
3 842 518 595 (2002.03)
Courroie dentée (3, Fig. 16)
Effectuer des contrôles réguliers en
vérifiant surtout à l'oeil nu si les points de
soudure ne commencent pas à s'user.
Contrôler le sens de marche (dans le
sens de la flèche) !
Graisser le cas échéant la courroie
dentée avec huile minérale viscosité 68
selon DIN (p.ex. Aral, Shell).
Fig . 16