Vibration And Noise Reduction - Parkside HG04994 Bedienungs- Und Sicherheitshinweise

Switch the power off immediately if the tool blocks
¾
while in use. Be prepared for high reaction moments as these can
cause kickback.
While working on the appliance, transporting it or
¾
storing it, always set the rotation direction switch to
the central position (lock position). This prevents the power
tool from starting up unintentionally.
˜ Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of
operation, use low-vibration and low-noise operating modes as well as
wear personal protective equipment.
Take the following points into account to minimise the vibration and noise
exposure risks:
Only use the product as intended by its design and these instructions.
¾
Ensure that the product is in good condition and well maintained.
¾
Use correct attachments for the product and ensure they are in good
¾
condition.
Keep tight grip on the handles / grip surface.
¾
Maintain this product in accordance with these instructions and keep
¾
it well lubricated (where appropriate).
Plan your work schedule to spread any high vibration tool use across
¾
a longer period of time.
108 GB/MT