Acoustic Signals - Electrolux GA60LVCN Benutzerinformation

10 www.electrolux.com
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
3. Press
4. Press the on/off button to confirm the
6.4 The rinse aid empty
notification
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying to
refill rinse aid. If you are using multi-tabs
containing rinse aid and you are satisfied
with the drying result, you can deactivate
the notification for refilling rinse aid.
However, we recommend that you always
use rinse aid for best drying performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
Downloaded from www.Manualslib.com
hold simultaneously
the indicators , ,
start to flash and the display is blank.
.
• The indicators ,
off.
• The indicator continues to
flash.
• The display shows the current
setting: e.g. = level 4.
– The levels of rinse aid are from
0A to 6A.
– Level 0 = no rinse aid is
released.
again and again to change
the setting.
setting.
hold simultaneously
the indicators , ,
start to flash and the display is blank.
manuals search engine
2. Press
• The indicators
• The indicator
• The display shows the current
and until
and
3. Press
and go
deactivated.
4. Press the on/off button to confirm the
setting.
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
save
You can also set applicable options
together with the programme.
2. Press and hold
indicator comes on with fixed light.
How to set the MyFavourite
programme
Press
• The indicators that are related to
• The display shows the number and

6.6 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
and until
There is also an acoustic signal that
and
sounds when the programme is
completed. By default this acoustic signal
.
,
off.
continues to
flash.
setting: = the rinse aid
dispenser is activated (factory
setting).
to change the setting.
= the rinse aid dispenser is
until the related
.
the MyFavourite programme and
options come on.
the duration of the programme.
and go