Energysaver; Acoustic Signals - Electrolux ESL 6391RA Benutzerinformation

How to memorise a programme
1. Press the on/off button to activate the
appliance.
2. Set the programme that you want to
memorise. you can also set applicable
options together with the programme.
It is not possible to memorise the op-
tions Multitab and Delay.
3. Press and hold MyFavourite until the
related indicator comes on with fixed
light.
How to set the MyFavourite
programme
1. Press MyFavourite. The indicators
that are related to the MyFavourite
programme and options come on.
• The display shows the number and
the duration of the programme.
5.2 TimeSaver
This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The to-
tal programme duration decreases by ap-
proximately 50%.
The washing results are the same as with
the normal programme duration. The dry-
ing results can decrease.
How to activate the TimeSaver option
1. Press TimeSaver. The related indica-
tor comes on. In the display you can
see the update of the programme du-
ration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off.
5.3 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press the on/off button to activate the
appliance.
2. Press Multitab, the related indicator
comes on.
The option stays on until you deactivate it.
Press Multitab, the related indicator goes
off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the Multitab option.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.

5.4 EnergySaver

This option decreases the temperature in
the last rinse phase.
The use of this option decreases the ener-
gy consumption (up to 25%) and the pro-
gramme duration.
The dishes can be wet at the end of the
programme.
How to activate the EnergySaver
option
1. Press EnergySaver. The related indi-
cator comes on. In the display you can
see the update of the programme du-
ration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off.

5.5 Acoustic signals

The acoustic signals operate when the
appliance has a malfunction or when the
adjustment of the level of the water soft-
ener occurs. It is not possible to deacti-
vate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
ENGLISH 25