Acoustic Signals - Electrolux GA55SLVCN Benutzerinformation

74 www.electrolux.com
• The display shows the current
setting:
deactivated.
3. Press
= rinse aid dispenser activated.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs and
when you set the level of the water
softener. It is not possible to deactivate
these acoustic signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
to flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting:
3. Press
= Acoustic signal on.
4. Press the on/off button to confirm the
setting.
6.5 How to set the colour of the
TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
All manuals and user guides at all-guides.com
= rinse aid dispenser
to change the setting.
and
, , and
.
, and
continues to
= Acoustic signal off.
to change the setting.
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
to flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
flash.
• The display shows a number and
the letter C. Each number refers to
a different colour.
–
3. Press
the colour.
• You can see the different colours
on the kitchen floor.
4. Press the on/off button to confirm the
setting.
6.6 MyFavourite
With this option you can set and save the
programme that you use more frequently.
until
You can only save 1 programme. A new
start
setting cancels the previous one.
How to save the MyFavourite
go
programme
1. Set the programme that you want to
save
You can also set applicable options
together with the programme.
2. Press and hold
indicator comes on with fixed light.
How to set the MyFavourite
programme
Press .
• The MyFavourite indicator comes
on.
and
, , and
.
, and
continues to
= TimeBeam deactivated.
again and again to change
until the related
until
start
go