Herunterladen Inhalt Inhalt Diese Seite drucken

Daily Use; Setting And Starting A Programme - Electrolux GA60LVCN Benutzerinformation

Vorschau ausblenden Andere Handbücher für GA60LVCN:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

9. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
Make sure that the appliance is in
programme selection mode.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
9.1 Using the detergent
1. Press the release button (A) to open
2. Put the detergent, in powder or
3. If the programme has a prewash
4. Close the lid. Make sure that the lid
Downloaded from
www.Manualslib.com
appliance.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
for the type of load and the degree of
soil.
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
the lid (C).
tablets, in the compartment (B).
phase, put a small quantity of
detergent on the inner part of the
appliance door.
locks into position.
manuals search engine
9.2 Setting and starting a
programme
The AUTO OFF function
This function decreases energy
consumption by deactivating automatically
the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the
appliance is in programme selection
mode.
3. Press repeatedly
shows the number of the programme
you want to start. The display will
show the programme number for
approximately 3 seconds and then
show the programme duration.
• If you want to select the
MyFavourite programme, press
.
– The indicators of the options
related to the MyFavourite
programme come on.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
Starting a programme with delay
start
1. Set a programme.
2. Press
again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
The delay indicator comes on.
3. Close the appliance door to start the
countdown.
ENGLISH
13
until the display

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis