Options; Multitab Function; Acoustic Signals - Electrolux GA60LV221 Benutzerinformation

OPTIONS

MULTITAB FUNCTION

Activate this function only when you use
the combi detergent tablets.
This function deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
Activating the multitab
function
Activate or deactivate the multitab
function before the start of a pro-
gramme. You cannot activate or
deactivate this function while a pro-
gramme operates.
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold function buttons (D) and
(E) at the same time until the multitab
indicator comes on.
The function stays on until you de-
activate it. Press and hold function
buttons (D) and (E) at the same
time until the multitab indicator
goes off.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Deactivate the multitab function.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse aid.

ACOUSTIC SIGNALS

The acoustic signals operate in these con-
ditions:
• The programme is completed.
• The level of the water softener is adjus-
ted electronically.
• The appliance has a malfunction.
Factory setting: on. You can deac-
tivate the acoustic signals.
Deactivating the acoustic signals
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold function buttons (B) and
(C) at the same time until the indicators
of function buttons (A), (B) and (C)
flash.
4. Press function button (C),
• The indicators of function buttons (A)
and (B) go off.
• The indicator of function button (C)
continues to flash.
• The display shows the setting of the
acoustic signals.
5. Press function button (C) to change the
setting.
6. Deactivate the appliance to confirm.
ENGLISH 65
On
Off