Energysaver; Acoustic Signals - Electrolux ESF 6610ROW Benutzerinformation

26 www.electrolux.com
5.1 TimeSaver
This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The to-
tal programme duration decreases by ap-
proximately 50%.
The washing results are the same as with
the normal programme duration. The dry-
ing results can decrease.
How to activate the TimeSaver option
1. Press TimeSaver. The related indica-
tor and the programme bar come on.
In the display you can see the update
of the programme duration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off. The programme bar does
not come on.
5.2 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press Option until the Multitab indica-
tor comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse
aid.

5.3 EnergySaver

This option decreases the temperature in
the last rinse phase.
The use of this option decreases the ener-
gy consumption (up to 25%) and the pro-
gramme duration.
The dishes can be wet at the end of the
programme.
How to activate the EnergySaver
option
1. Press Option until the EnergySaver in-
dicator comes on. In the display you
can see the update of the programme
duration.
• If the option is not applicable to the
programme, the related indicator
does not come on.
5.4 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme
at a time. A new setting cancels
the previous one.
How to memorise a programme
1. Set the programme that you want to
save. You can also set applicable op-
tions together with the programme. It
is not possible to save the option De-
lay.
2. Press and hold, at the same time,
Program and Delay until the pro-
gramme bar flashes quickly.
How to set the MyFavourite
programme
1. Press and hold Program until the indi-
cators that are related to the MyFa-
vourite programme and options come
on
• The display shows the duration of
the programme.

5.5 Acoustic signals

The acoustic signals operate when the
appliance has a malfunction. It is not pos-
sible to deactivate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.