Acoustic Signals - Electrolux ESF 7530ROW Benutzerinformation

28 www.electrolux.com
4. Press the on/off button to confirm the
setting.
6.4 Use of rinse aid and multi-
tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
and the display is blank.
2. Press Option.
• The indicators
• The indicator
• The display shows the current
3. Press Option to change the setting.
deactivated.
The rinse aid indicator goes off.
4. Press the on/off button to confirm the
setting.

6.5 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
, and
go off.
to flash.
setting: = rinse aid dispenser
activated.
= rinse aid dispenser
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press Start
3. Press Start to change the setting.
4. Press the on/off button to confirm the
,
start to flash
6.6 MyFavourite
With this option you can set and save the
programme that you use more frequently.
, and
You can only save 1 programme. A new
setting cancels the previous one.
continues
How to save the MyFavourite
programme
1. Set the programme that you want to
You can also set applicable options
together with the programme.
2. Press and hold simultaneously
How to set the MyFavourite
programme
Press and hold Program until the
indicators that are related to the
MyFavourite programme and options
come on.
The display shows the duration of the
programme.
hold simultaneously Delay and Start
until the indicators
, and
and the display is blank.
• The indicators
and go off.
• The indicator
• The display shows the current
setting: = Acoustic signal off.
= Acoustic signal on.
setting.
save
Program and Delay until the
indicators of the programme and the
options flash for a few seconds.
,
start to flash
,
continues to flash.