Remote Control - CLIVET DUCT 2 ID3-XY Serie Handbuch Für Installation, Betrieb Und Wartung

3.4

Remote control

Unit switch-on/off button
Increases the temperature
by 1°C at a time.
The maximum
temperature is 30°C
Used to select the fan speed
from the following options:
AU → 20% → 40% → 60% → 80%
Press the TEMP
to increase/decrease the fan
speed in 1% increments.
* ADVANCED FEATURES
refer to the Remote Control
Manual.
3.5 Operation
For optimum performance in cooling, heating and dehumidification modes, use the unit within the temperature ranges
below. If the air conditioner is used outside of these ranges, some protective functions may trip and cause suboptimal
operation.
Room temperature
Outdoor temperature
To further optimise unit performance, take the following steps:
– Keep doors and windows closed.
– Limit power consumption using the ON TIMER and OFF TIMER.
– Avoid obstructing air inlets or outlets.
– Inspect and clean the filters regularly.
36
ON/OFF
TEMP
*
FAN
→ 100%
or button
*
Cooling Mode
17°C ÷ 32°C
-15°C ÷ 50°C
MODE
Presents the operating
modes in the following
order:
AUTO » COOL »
DRY » HEAT » FAN
*
*
*
TEMP
Reduces the temperature
by 1°C at a time.
The minimum temperature
*
is 17°C
*
*
*
Heating Mode Dehumidification Mode
0°C ÷ 30°C
-15°C ÷ 24°
Use
Fig. 51
10°C ÷ 32°C
0°C ÷ 50°C