Adding Further Items (Tare Function) - Silvercrest SKWS 5 A1 Bedienungsanleitung

Adding further items (tare function)

The tare function is useful if you wish to weigh the foodstuffs in a container but do
not wish to weigh the container itself.
■ Press the zero button
the zero button
■ Depending on the weight of the container (initial weight) the function and the
symbol display on the kitchen scales changes.
Weight of container (initial weight) less than 200 g; the display shows
the symbol
NOTE
► As long as you can see the
5000 g.
■ Now place the amount to be weighed on the scales. The weight of the items
you have added will be shown on the display
■ Press the zero button
again.
■ As long as the weight of the added items does not exceed 200 g, the
symbol will be shown in the display
steps as often as required (however, a total weight of 5000 g may not be
exceeded).
■ If the weight of the added items exceeds 200 g (e.g. 250 g of flour), the
display
■ Now place a further partial quantity to be added on the scales. The weight
of the items you have added and the
display
■ Press the zero button
quantities will be displayed. The weight of the container is not included in the
overall weight.
■ Press the zero button
the
a total weight of 5000 g may not be exceeded).
Weight of container (initial weight) more than 200 g; the display shows
the symbol
■ Now place a further amount to be weighed on the scales. The weight of the
items you have added and the
GB │ IE
■ 20 │
. Place the empty container on the scales and press
again. The scales indicate a weight of "0" grams again.
once. The scales indicate a weight of "0" grams
shows the symbol
.
once and the overall weight of the weighed partial
again. The scales will again show "0" grams and
symbol. You can repeat these steps as often as required (however,
symbol on the scales you can weigh a further
.
and you can repeat the above two
.
symbol will be shown on the
symbol will be shown on the display .
SKWS 5 A1