Herunterladen Inhalt Inhalt Diese Seite drucken

Customer Service; Technical Data; Original Spare Parts And Accessories - visomat comfort form Gebrauchsanweisung

Oberarm-blutdruckmessgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

E
Error
Possible cause
The time is visible
Batteries flat
in the display, but
the measurement is
interrupted and the
symbol appears.
Date and time are
Function was uninten-
not visible in the
tionally deactivated
display

2. Customer service

Device repairs may only be performed by the manufacturer or an ex-
pressly authorised body. Please contact:
UEBE Medical GmbH
Bürgermeister-Kuhn-Straße 22
97900 Külsheim, Deutschland
info@uebe.com
www.uebe.com

3. Technical data

Model:
visomat comfort form
Size:
L = 127.3 mm x W = 162.3 mm x H = 96 mm
Weight:
approx. 332 g without batteries and cuff
Display:
LCD display (liquid crystal display) for measured
values and check displays
Memory:
2 memories each capable of storing 120
readings
Measurement method:
Oscillometric determination of systole, diastole
and pulse
Clinical trial:
EN 1060-4:2004 2006, Minutes of the European
Society of Hypertension 2009, EN ISO 81060-
2:2009 2010
Reference method of the
Auscultatory measurement
clinical test:
EN-58
Technical information
Remedy
Replace batteries.
Activate the date and time
function as described on
page 44.
Technical information
Pressure display range:
3-300 mmHg
Measurement range:
Systolic: 50-250 mmHg
Diastolic: 40-150 mmHg
Pulse measurement: 40-160 pulses/minute
Measurement precision:
Blood pressure measurement (cuff pressure): ±
3 mmHg, Pulse rate: ± 5%
Power supply:
4 x 1.5 V AA LR6 alkaline manganese batteries,
durability: over 800 measurements in 2 years
Optional: visomat mains adapter, output 6 V DC,
500 mA
Power consumption:
max. 4 W
Cuff:
Cuff type UPW for an arm circumference of 23-
43 cm, applied part type BF
Operating conditions:
Ambient temperature 10°C to 40°C, relative
humidity 15% to 85% non-condensing, air
pressure 700 to 1060 hPa
Conditions for storage and
Ambient temperature -20°C to +60°C
transport:
Relative humidity 10% to 95%, non-condensing
Time to adjust from min-
2 hours
imum/maximum storage
temperature to operating
temperature:
Inflation and deflation:
Regulated automatically
IP rating:
IP 20: Protected against solid foreign bodies
with a diameter from 12.5 mm, no protection
against water.
Protection against electric
Internal power supply, applied part type BF
shock:
(cuff )
Expected service life:
5 years
Operating mode:
Continuous operation
Classification:
Internal power supply using batteries.

4. Original spare parts and accessories

The following original spare parts or accessories are available through
specialist retailers:
E
EN-59

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis