Assembly Of The Sauna Heater - EOS 46.U XL Montage- Und Gebrauchsanweisung

Assembly of the sauna heater 46.U XL
The sauna heater is supplied in two pa-
ckages contain the left subassembly (incl.
accessories) and a right subassembly.
First unpack the two assemblies and posi-
tion the assembly vertically on the left and
right as shown in Fig. 3.
Please note that a 6 m long connection
cable is pre-mounted to both assemblies.
Do not place any sharp metal edges on
the silicone lines to ensure that the outer
sheath of the connection cable is not
damaged.
Now place both components together with the middle foot
parts. Screw the two parts into the nuts to the lower area with
the 4 supplied socket screws (1) M 6 x 20 as shown in detail Y.
Y
1
1
In a further step, screw the enclosed securing bracket to the
upper rear wall parts according to detail X with the supplied
tapping screws (2) B 4.2 x 9.5.
Assembly left
Fig. 3
X
E
Assembly right
2
4
Fig. 4
29