EOS 46.U XL Montage- Und Gebrauchsanweisung Seite 32

Once the sauna heater is attached to the assembly wall and the pouring grooves are mounted,
you can mount the shaft wall to the inside of the cabin. Always observe the minimum safety gaps
stated in Fig. 1 + 2.
Finally, attach the two protective grilles to the upper area of the shaft, so that no objects can fall
unintentionally onto the sauna heater.
To this end, the sauna technician attaches suitable holders to the rear wall of the cabin and/or to
the intermediate wall of the shaft.
39 cm
min. 30 cm
20 cm
Cut-out from Fig. 2
87 cm
Caution!
Ensure that the protective grille is installed correctly above the sauna heater as shown in Fig.
1+2. Observe the safety gaps. Risk of fire!
32
E