Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Connection - EOS 46.U XL Montage- Und Gebrauchsanweisung

Hinterwandofen
Vorschau ausblenden Andere Handbücher für 46.U XL:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

where else.
When using your sauna in a dry
Finnish mode never add sauna essences or
place any herbs into the vaporizer holder
for essences/herbs. Fire hazard!
Never add more essences or vol-
atile oils than advised on the packaging.
Never use alcohol or undiluted concen-
trates. Caution! Fire hazard!
When designing the cabin ensure
that the external exposed glass surfaces
only reach a maximum temperature of
76°C. If necessary, protective features
need to be fitted.
• Please note that the wooden surfaces in
the areas exposed to high heat are subject
to possible discolourations (e.g. darkening
of wood).

Electrical connection

Using the above-mentioned wiring diagram
and the information on the wiring circuit ad-
hered to the respective control system, your
electrician will be able to connect the system
without further instructions.
Please note that, for safety reasons, power ca-
bles may not be laid visibly on the interior walls
of the cabin. Most sauna cabins have empty
ducts fitted into the wall element with the air
intake.
If no empty ducts are available in your cabin,
drill a sufficiently sized hole in the cabin wall
directly next to the place where the cable exits
the sauna heater and guide this cable outside
through the hole to the control unit. The cable,
and all other connecting cables (mains power
cables and cabin lighting), should be installed
in installation ducts or also be protected against
damage on the outside of the cabin e.g. by lay-
ing them in installation pipes or attaching wood
cover strips.
The sauna heater, when made use of time pre-
set and remote control*, may only be used with
an appropriate cover protection or any other
safety device.
*Remote control – means settings, switching, control
and adjustment of the sauna control unit by means of
commands transmitted from a remote location beyond
sight distance using telecommunication, wire- or wire-
less signal transmission systems, network and similar
systems. (this also includes timers) (from EN 60335-1)
Caution!
Dear Customer,
In compliance with the valid regulations,
only certified electricians may connect the
sauna heater and the sauna control system
to the mains power supply.
Please note that you must provide a copy
of the invoice from the electrical company
who installed the sauna in case of a war-
ranty claim.
To preserve the right of a warranty claim,
only original spare parts of the manufac-
turer may be used.
EN
25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis