Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Now screw the front upper cover bracket using the 2 self-tapping screws (3) B 2.9 x 9.5. Then push
the cover rail with the strap from below into the opening of the angled cover. Hinge downwards
and screw on with 2 self-tapping screws (3) B2.9 x 9.5.
Protective grille
4
4
Angled bracket
3
Sauna stones
4
3
Cover rail
Fig. 5
It may be necessary to slightly release the lower socket screws so that the cover parts can be
mounted more easily.
Check whether the stone baskets are attached securely in the heating groups and fill with the
previously washed sauna stones!
Distribute the stones evenly so that there is enough space between the stones for the air to circulate.
Observe the fig. and the guidelines in the chapter 'Sauna stones' .
Caution! Do not operate the heater without stones! Risk of fire!
Now position the entire sauna heater to fit into the air intake openings (Fig, 1) on the designated
mounting wall. Now use the supplied chipboard screws (4) to secure the heater to the two side
parts left and right and to the securing bracket top centre.
30
E
Werbung
Inhaltsverzeichnis
