Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safety Instructions - Panasonic EY7430 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
Model No: EY7430 & EY7530 & EY3732 & EY0L32
EN
Common subject matter of the power tool
in this book
I. IMPORTANT SAFETY INSTRUC-
TIONS
Read All Instructions
1) Before using battery charger, read all
instructions and cautionary markings on (1)
battery charger, (2) battery pack.
2) CAUTION -To reduce the risk of injury,
charge only applicable battery pack as
shown in "SPECIFICATIONS". Other types
of batteries may burst causing personal
injury and damage.
3) Do not expose charger and battery pack to
rain or snow or use in damp location.
4) Use of an attachment not recommended
may result in a risk of fire, electric shock,
or injury to persons.
5) To reduce risk of damaging the electric
plug and cord, pull by plug rather than cord
when disconnecting charger.
6) An extension cord should not be used.
7) If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent, or a similarly qualified person in
order to avoid a hazard.
8) Do not operate charger if it has received
a sharp blow, been dropped, or otherwise
damaged in any way; take it to a qualified
service agent.
9) To reduce risk of electric shock, unplug
charger from outlet before attempting any
maintenance or cleaning.
10) Make sure cord is located so that it will not
be stepped on, tripped over, or otherwise
subjected to damage or stress.
11) Do not use other than the Panasonic
battery packs that are designed for use
with this rechargeable tool.
Do not use a battery pack that has been
modified. This includes battery packs that
have been opened and had parts replaced.
12) Panasonic is not responsible for any damage
or accident caused by the use of the recycled
battery pack and the counterfeit battery pack.
13) Do not attempt to disassemble the battery
charger and the battery pack housing.
14) Do not store the tool and battery pack
in locations where the temperature may
reach or exceed 50 °C (122 °F) (such as a
metal tool shed, or a car in the summer),
which can lead to deterioration of the
storage battery.
EY7530_7430_3732_0L32_02(Eng).indd
- 18 -
18
15) Do not charge battery pack when the
temperature is BELOW 0 °C (32 °F) or
ABOVE 40 °C (104 °F).
16) Do not incinerate the battery pack. It can
be explode in a fire.
17) The charger is designed to operate on
standard household electrical power only.
Charge only on the voltage indicated on
the nameplate. Do not attempt to use it on
any other voltage!
18) Do not abuse cord. Never carry charger by
cord or yank it to disconnect from outlet.
Keep cord away from heat, oil and sharp
edges.
19) Charge the battery pack in a well ventilated
place, do not cover the charger and battery
pack with a cloth, etc., while charging.
20) Do not short the battery pack. A battery
short can cause a large current flow,
over-heating and burns.
21) NOTE: If the supply cord of this appliance
is damaged, it must only be replaced by a
repair shop appointed by the manufacturer,
because special purpose tools are
required.
22) Do not dispose of the battery pack in a fire,
or expose it to excessive heat.
23) Do not allow metal objects to touch the
battery pack terminals.
24) Do not carry or store the battery pack
in the same container as nails or similar
metal objects.
25) After removing the battery pack from the
tool or the charger, always reattach the
pack cover. Otherwise, the battery contacts
could be shorted, leading to a risk of fire.
26) When the battery pack has deteriorated,
replace It with a new one.
Continued use of a damaged battery pack
may result in heat generation, ignition or
battery rupture.
27) These tools are not waterproof.
• Do not use it in damp or wet locations.
• Do not expose it to rain or snow.
• Do not wash it in water.
Keep it in a safe, dry, and clean area when
it is not in use.
28) Do not modify, or open in an attempt to
repair. This could lead to injury resulting
from fire or electric shock.
29) Make sure all set functions are working
properly before beginning use.
30) Do not drop or strike.
2014/08/18
15:40:54

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ey0l32Ey3732Ey7530

Inhaltsverzeichnis