Panasonic EY7430 Bedienungsanleitung Seite 12

EN
Bit-locking Function for
1. With the trigger not depressed and a
screwdriver bit locked in place, the tool
can be used as a manual screwdriver.
There will be a little play in the chuck,
but this is not a malfunction.
2. This feature is handy for tightening
screws that require more torque than the
maximum torque of the driver (position
" " on the clutch), for confirming
the tightness of a screw or to loosen an
extremely tight screw.
LED light
LED light illuminates when the trigger
depressed and turns off when the trigger
is released.
• The light illuminates with very low
current, and it does not adversely
affect the performance of the tool
during use or its battery capacity.
CAUTION:
• The built-in LED light is designed
to illuminate the small work area
temporarily.
• Do not use it as a substitute for a
regular flashlight, since it does not
have enough brightness.
CAUTION: DO NOT STARE
INTO BEAM.
Use of controls or adjustments
or performance of procedures
other than those specified
herein may result in hazardous
radiation exposure.
EY7530_7430_3732_0L32_02(Eng).indd
EY7430
- 12 -
12
Model No: EY7430 & EY7530
Battery level indicator for
1. This tool is equipped with a Battery level
indicator, which indicates the battery
pack charge level.
2. When the Battery level indicator is
green, the battery is fully charged.
3. When the Battery level indicator is
orange, that the battery has used
approximately one half of its charge.
4. When the Battery level indicator is red,
battery pack is depleted and needs to be
charged.
NOTE
• When you start in the state of low
battery level, there is the possibility
that the Battery level indicator will
freeze flashing and stops working.
Because the battery level is not
sufficient, please use the battery pack
after it is charged.
EY7430
2014/08/18 15:40:53